For the HX, GX and DL series, equipped with the DataSync technology, simply press and hold the reset button for one second. For regular models, the unit should function normally as soon as it is reconnected to the power outlet.
There are a few possible causes that could explain a decrease of your vacuum’s suction strength. To find out what to do for each possible cause, please consult the Cyclo Vac owner’s manual, pages 28 and 29. If none of the suggestions restore the suction strength, contact your local authorized service center.
Yes. We strongly recommend against vacuuming abrasive materials such as cement, plaster and gyproc dust. This fine dust could work its way into the motor, causing considerable damage. Should you do so inadvertently, immediately clean the filters and, as a precautionary measure, contact your authorized service center to determine the extent of the damage to the unit. […]
No. Your vacuum cleaning system is designed to collect everyday dry matter (dust). It is approved by authorized testing agencies for dry use only. Do not use on wet surfaces. Should you accidentally vacuum liquids, immediately unplug the unit from the electric outlet, then empty and wipe the dust receptacle with a dry cloth. After […]
Before operating your central vacuum, we recommend you read the whole owner’s manual and proceed with a quick verification of your unit’s installation, as detailed on page 17. For instance, you must verify that your central vacuum is properly connected to the piping system and to a grounded electrical outlet, and that the low voltage wires are […]
If your unit has a bypass motor and is installed in a room of less than 8’ x 10’, exterior ventilation will be absolutely necessary. However, it is best, when possible, to install an exterior exhaust for your central vacuum system. This exhaust considerably decreases the central vacuum sound level and allows, if there are […]
The connections to the piping system will require some basic tools: a mitre box and small saw or a pipe cutter. To simplify matters, installation kits, including necessary fittings, pipes, glue, low voltage wiring, and a detailed instructions booklet, are available, as well as a complete installation DVD that can serve as a step-by-step guide.
